
Disclosure: All of the vape products we review on this website are tested by our trained staff with years of experience. As a part of the review, Worldvaping.com links directly to the shops or brands’ website so that customers can purchase the products easily. We receive commissions from these providers and the commisions we gain help us run this website. However, this does not affect the money you pay. Worldvaping is not allowed to use by people under eighteen years old. If you are under eighteen years old, you have no access to this website. We do not offer any medical advice. Thank you.
A General Outlook
In this review of the Aspire Breeze NXT, we will delve deeper into the anatomy of this pod, and discuss its various pros and cons, before giving our final verdict on the Aspire Breeze NXT.
Specifications
Aspire Breeze NXT
What's in the Box?

1*Breeze NXT battery unit
1*Breeze NXT pod
2*0.8Ω mesh coils
1*Micro USB cable
1*User manual
1*Warranty card
Pod Design
The side of the pod has a silicone seal which can be lifted for refilling. The tank supports up to 5.4ml of liquid, and the seal is conveniently placed so that the device can be replenished without separating the tank from the body. However, if not done carefully, it can cause some leaking. The e-liquid level can be easily checked as a result of transparent material.
On the bottom of the pod are two airflow holes in the top left and bottom right corner. One of the holes is for the draw, while the other is for the button activation system. The pod is reversible since the holes are mirrored.
The Aspire Breeze NXT has a different mechanism for separating the tank from the rest of the device. It’s removed by gripping it by the textured sides and pulling as hard as possible. Unlike the original Breeze, the NXT tank isn’t spring-loaded and has no buttons on the side to remove it.
Filling the Pod
- Open the silicon plug, located right below the grippy surface of the pod.
- Fill the tank, continually monitoring the liquid level throughout the process.
- Close the lid and connect the pod back to the device if you removed it.
- Don’t start vaping right away. Leave the liquid to settle for around 5-10 minutes, so that the cotton coil soaks it incompletely.
In contrast to the Breeze 2, Aspire Breeze NXT doesn’t have a viewing window on the device in front of the pod. Instead, there’s a thin line on the side that can somewhat be seen through. The sides are textured and fairly easy to see through. Still, the secure filling method contributes to the device’s convenience factor.

Coil Installation
- As always, make sure to prime the coil before installing it. Put in a few drops of e-liquid through the top opening and the side holes of the coil directly on the cotton, ensuring that it’s soaked up good.
- Align it with the hole at the bottom of the pod – it’s orientation-specific, so you can’t go wrong.
- Push in forcefully until it’s completely snug.
When you’re installing a new coil, it’s going to need a bit more pressure to fit completely. However, it’s crucial to make sure that it’s completely flush so that no liquid escapes. To make the installation smoother, you can lube up the o-rings.
The process of removing the coil is completely the same. It can be a bit difficult since it’s a tight fit, so try to use your nails to loosen and separate it a bit. The plug & play mechanic is fantastic, especially if you’re in a hurry.
Another advantage of the Breeze NXT is that the pod doesn’t have to be empty while installing/removing the coil. The liquid stays inside even when the pod is completely full. However, to reduce the chances of spilling, it’s best to replace it when the tank is at least half empty. The coils were redesigned in comparison to former devices, which means they are exclusive and can only be used on the Aspire Breeze NXT.
Adjustable Airflow

Rotating it until the hole is half covered is going to provide a medium MTL experience while leaving it wide open gives off a very loose MTL. It ranges from a restrictive DTL all the way to tight MTL. No matter what type of user you are, there is going to be a suitable option for everyone.
The wheel is metal and high quality. It’s tightly in-built, so you can be sure that when you set it up, it’s not going to move at all. Furthermore, you won’t have to worry about accidentally rotating it. Its ergonomic design makes it easy to adjust with one finger.
The convenience factor, along with the variety makes this one of the selling points of Aspire Breeze NXT.
Buttons & Indicators
Depending on the remaining battery charge, the LED is going to light up in different colors anytime you press it to vape. It’s utterly dependent on the remaining voltage. The light changes as follows:
- Above 3.8V – green (fully charged)
- Between 3.5-3.8V – blue (partial charge)
- Below 3.5V – red (time to charge)
Strength & Taste
It can take a few minutes for the flavor to really show up. In the beginning, it might feel a little bit underwhelming. You should always wait for the e-juice to settle up for at least five minutes and let the coil soak it in. The vapor is not harmful for its size, but don’t expect to be cloud chasing with it.
The device has a fairly warm vape, and with the airflow wide open, it’s going to create a lot of vapor. Because of this, you should be careful with the nicotine content of your juices and salts, as it can be quite overwhelming, especially if you’re a beginner.
Since the power goes down as the battery empties, the difference in vaping quality is going to be fairly noticeable. The vape is going to be a lot cooler with a somewhat milder flavor, which might even be an advantage to some.
Performance & Battery Life

The device is charged through a micro USB port on the opposite side of the airflow control wheel. Charging power is 1A, and it’s going to take 60-90 minutes to charge it completely.
The LED indicators are going to light up during charging to show the current power level. Security is also up to the standards with both overcharge and overheat protections.
Pros and Cons
Pros
- Adjustable airflow on the side
- Replaceable coils
- Automatic draw or fire button for choice
- Easy side filling
- Bypass output mode
Cons
- No constant output